Streaming
Click to enable continuous multicast streaming to the switch. This means that the multicast
connection is not preceded by a RCP+ registration. The encoder streams always all data to the
switch. The switch in return (if no IGMP multicast filtering is supported or configured) sends
this data to all ports, with the result that the switch will flood.
You need streaming when using a non-Bosch device for receiving a multicast stream.
See also
– Configuring multicast, 21
Advanced tab (Video Streaming Gateway)
Main window > Devices tab > Expand > Expand Devices > Video Streaming
Gateway device > Service tab
Allows you to activate logging for Video Streaming Gateway.
See Advanced tab for Configuration Manager.
12.20
38 en | User interface Video Recording Manager
2012.05 | v1 | DOC Software Manual
Bosch Sicherheitssysteme GmbH
