A SERVICE OF

logo

Open as PDF
next previous
-41-
Revision 4/F3591 © Moffat Ltd, August 2004
1) Remove the leg tray and legs from both
units.
2) Remove the leg securing frame from the
top unit.
3) Remove the four black plastic feet and
insert into the new short legs provided.
Bolt the new legs onto the bottom unit.
APPENDIX A. DOUBLE STACKING INSTRUCTIONS
4) Place the top unit onto the bottom unit and
remove the screws along the back joining
edge of both units. (See diagram). Screw
on rear stacking plate.
5) The top oven drain hole must be blocked
up. Fit the bung provided. (To achieve a
permanent seal we recommend also using
some high temp silicone sealant).
Figure A.1
Double Stacking Kit
- Part number 016372