54 CCM Installer/User Guide
Disconnect Command
The Disconnect command terminates a session with a serial device that was previously initiated
with a Connect command.
Access right: port-specific
Access level: ADMIN, APPLIANCEADMIN or others with access to port
Syntax
DISCONNECT
Help Command
The Help command displays information about CCM appliance commands. The display may span
more than one screen; see Command displays on page 46 for more information.
Access right: none needed
Access level: none needed
Syntax
HELP [<command_name>]
Examples
The following command displays information about the Show Server CLI command.
help sho ser cli
The following command displays a list of all commands.
help
The following command displays a list of all commands that begin with Server.
help server
NFS Command
The NFS command enables or disables use of the NFS feature on the CCM appliance, and specifies
the location of the NFS server, its mount point, the type of files that will be created and the protocol
to be used. For more information, see NFS history files on page 35.
Access right: SCON
Access level: APPLIANCEADMIN
Table 5.2: Help Command Parameter
Parameter Description
<command_name>
Command name.
Default: Displays list of all commands
