Telephone: (508) 678-9000 Fax: (508) 678-9447
29
Non-Microprocessor Coin Meter Control Box Assembly
Illus. No. Part No. Qty. Description
1 122603 1 9-Pin Socket Connector ONLY
2 122701 9 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
3 315010 1 9-Pin Connector Bracket
4 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
5 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
6 141403 1 Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 131030 1 Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
131031 1 Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
9 131814 1 Motor Control Relay (for 120 volt controls Only)
10 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
11 136008 * Fuse Block/Strip ONLY
875250 * In-Line Fuse Holder Assembly ONLY
12* 136057 ** 1/2-Amp (slo blo) Fuse ONLY
136052 ** 4-Amp Fuse ONLY
136054 ** 15-Amp (slo blo) Fuse
136056 ** 20-Amp (slo blo) Fuse
13 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
14 136002 2 Panel Mount Fuse Holder Assembly
15* 136052 ** 4-Amp Fuse ONLY
136054 ** 15-Amp (slo blo) Fuse
136056 ** 20-Amp (slo blo) Fuse
16 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
17 120715 1 30-Position Terminal Block
120709 1 8-Position Terminal Strip
18 151000 2 #6-32 Pal Nut
* As required.
** Check fuse rating for verification.
