A SERVICE OF

logo

Operational Features
5-100 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Use the following procedure to configure LLDP-MED using the Aastra Web UI:
Aastra Web UI
1 Click on Advanced Settings->Network->Advanced Network Settings.
2 The “LLDP” field is enabled by default. To disable LLDP, click the check mark in the box to clear
the check mark.
3 In the “LLDP Packet Interval” field, enter the time, in seconds, between the transmission of
LLDP Data Unit (LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default is 30.
4 Click to save your changes.
LLDP
LLDP Packet Interval
Draft 1