A SERVICE OF

logo

190 APPENDIX A: UPGRADING VCX SERVER SOFTWARE FROM V7.0 TO V7.1
The system displays several status messages. The last two messages are:
------------------- Installation Completed Successfully -------------------
------------------- VCX version 7.1.xc is now available -------------------
5 Change to the new software version by entering this command:
vcx-switchversion 7.1.xc
The system displays several status messages and provides prompts that
allow you enable Adhoc Conferencing and UPS Monitoring.
6 The Adhoc Conferencing prompt appears:
In order to support "ad-hoc" conferences with more than 3
participants, the Adhoc Conference Service is used. This
service should be enabled on this server, unless another
server dedicated to Adhoc Conferencing will be used instead.
If available, a separate server typically provides greater
capacity and may be shared among sites.
Use the Adhoc service on this server? (Y/N) [Y] :
If you want this server to act as a multi-caller (up to 6 callers)
conferencing server, enter
y. If not, enter n.
7 The UPS Monitoring prompt appears:
An Uninterruptible Power Supply (UPS) can be used with VCX
systems to avoid disruption due to a power outage. VCX
provides a UPS monitoring service which tracks the UPS's
status and performs a safe shutdown when the its battery is
depleted during a long power outage. To use this feature,
you must have a compatible UPS installed and configured in
accordance with the VCX documentation.
Enable UPS monitoring? [N] :
If you do not have a UPS installed and enter n (or press Enter); the
remaining UPS configuration prompts are not displayed.
If you do have a UPS installed and enter
y and see Configuring UPS
Monitoring for information on the subsequent UPS configuration
prompts.
8 After completing the Adhoc Conferencing and UPS Monitoring prompts,
the server reboots. When the reboot process has been completed, the
system starts VCX 7.1.x services.
9 After the system has completed the restart process, verify that the
upgrade has occurred by entering the following command: