Zenoah PE2300 Plumbing Product User Manual


 
PE2300
GB-5
G
B
5. For safe operation
PRECAUTIONS CONCERNING FUEL
The engine of this product is fueled by "mixed gaso-
line" that includes highly combustible fuel. Do not re-
fuel or store fuel containers where there is any risk of
combustion from incinerators, burners, bonfires,
kitchen stoves, electric sparks, welding sparks, etc.
•Smoking while operating or refueling is dangerous.
Please avoid this at all costs.
When refueling during use, always stop the engine
and make sure there are no naked flames in the vicin-
ity before refilling.
Any fuel spilt during refueling should be wiped off com-
pletely with a rag or similar before starting the engine.
After refueling, seal the fuel container, tightly close the fuel
tank cap, and start the engine at least 3 meters away.
PRECAUTION WHEN STARTING THE ENGINE
Please keep children, animals, etc. well away when
starting the engine and operating.
Do not touch the spark plugs or plug cords while the
engine is running, as you may get an electric shock.
Do not touch the muffler, spark plugs, or other metal
parts with your bare hands while the engine is run-
ning or immediately after stopping the engine, as there
is the risk of burns due to high temperatures.
MAINTENANCE PRECAUTIONS
In order to maintain the functions of the product, regu-
larly carry out the maintenance inspections listed in
this Manual. When maintenance or parts replacement
not indicated in this Manual are required, please con-
sult your product supplier or nearest ZENOAH prod-
uct dealer.
Never keep the engine running while carrying out in-
spections or maintenance.
Do not modify the pump or dismantle the engine. This
could lead to breakdown and serious accidents dur-
ing operation.
Do not touch the muffler or spark plugs with your bare
hands immediately after stopping the engine. There
is the risk of burns due to high temperature.
•For replacement parts, please use original ZENOAH
parts or brands designated by ZENOAH.
MAINTENANCE OF LABELS
1. Please keep warning labels clean and unmarked.
2. If warning labels become soiled or peel off, please
order from your supplier and replace with new ones.
3. When affixing new labels please wipe off all dirt and
moisture.