A SERVICE OF

logo

9. Installation- AMD
(Athlon 64-754)
2) Apply Thermal Grease
Spread thermal grease thinly and evenly
over the CPU core.
1) Fasten Nipples
Locate the backplate on the bottom of the
mohterboard under the CPU socket, then
fasten the nipples as shown on the right.
󳀎 When installing CNPS7000A on Athlon
64,Retention Frame is not needed.
3) Insert Bolts
Insert the bolts into the outer holes on the clip.
4) Fasten Bolts
Place the FHS on the center of the CPU.
Screw in both bolts in an alternating
fashion until they are completely tightened.
5) Supply Power
Connect FAN MATE 1 between the
motherboard and the fan.
CPU (IHS)
Thermal Grease
Bolt
Outer Hole
Inter Hole
Clip
3-Pin Fan
Connector
(Mainboard)
Mainboard
FAN MATE 1
Speed Control Knob
3-Pin Fan Connector
(CNPS7000A)
Backplate
Nipple
M/B
Big Hole
Washer

7