Filter
Top Products
6
8. Installation- AMD
(Athlon/Duron/Athlon XP-462)
2) Apply Thermal Grease
Spread thermal grease thinly and evenly
over the CPU core.
1) Install Clip Support
Install the socket 462 Clip Supports
as shown on the right.
Ensure to install A-Type clip
support(Blue) by the Lever.
3) Insert Bolts
Insert the bolts into the inner holes on the clip.
4) Fasten Bolts
Place the FHS on the center of the CPU.
Screw in both bolts in an alternating
fashion until they are completely tightened.
5) Supply Power
Connect FAN MATE 1 between the
motherboard and the fan.
CPU
B-Type Clip Support (White)
A-Type Clip Support (Blue)
Lever
Thermal Grease
Bolt
Outer Hole
Inter Hole
Clip
3-Pin Fan
Connector
(Mainboard)
Mainboard
FAN MATE 1
Speed Control Knob
3-Pin Fan Connector
(CNPS7000A)
B-Type Clip Support (White)
Small
Washer
M/B
Small
Washer
Bolt