Filter
Top Products
August 2004
HOW TO ORDER PARTS
Page 2
8800 Series Parts & Service Manual
To order parts, use the appropriate part number and specify finish if necessary.
For example, to order 10 curved lip strikes for any function:
Quantity Part Number Description
10 50-8800-2023-FIN Strike, Curved Lip
To order 10 cylinder latch levers for an Entrance Function (8807):
Quantity Part Number Description
10 50-8899-0010 Cylinder Latch Lever
For further assistance, contact your authorized Yale distributor or contact Yale directly at (800) 438-1951.
FINISH CHART
ANSI
Code
Finish Description Roses Levers Armor Fronts/Strikes
605 Bright Brass, Clear Coated 003 003 003
605e Bright Brass, PVD 003 003 003
606 Satin Brass, Clear Coated 004 004 004
606e Satin Brass, PVD 004 004 004
609 Satin Brass, Blackened, Satin Relieved, Clear Coated 609 609 009
611 Bright Bronze, Clear Coated 009 009 009
612 Satin Bronze, Clear Coated 010 010 010
613 Satin Bronze, Oxidized & Oil Rubbed 007 007 007
613e Satin Bronze, Oxidized, PVD 007 007 007
616 Satin Bronze, Blackened, Satin Relieved, Clear Coated 616 616 616
619 Satin Nickel Plated, Clear Coated 619 619 619
625 Bright Chrome Plated 026 026 032
626 Satin Chrome Plated 025 025 033
629 Bright Stainless Steel 032 032 032
630 Satin Stainless Steel 033 033 033
FINISH CARE
8800 Series Mortise Locks are designed to provide the highest standard of product quality and performance. Care should be
taken to ensure a long-lasting finish. When cleaning is required, use a soft damp cloth. Using lacquer thinners, caustic
soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing.
PVD LIFETIME FINISH
Physical Vapor Deposition (PVD) is a technologically advanced finish coating that provides the ultimate surface protection against
environmental elements and everyday wear and tear. PVD matches clear coated finishes in appearance, yet surpasses them in
durability.Yale
®
warrants all its PVD finishes against corrosion, tarnish, wear, discoloring and peeling for the lifetime of the part to
which it has been applied. Ask your sales representative for specific warranty information.
MAINTENANCE
Yale
®
8800 Series Mortise Locks are manufactured to be maintenance-free under normal operating conditions and environ-
ments. Subjection to extremely heavy traffic and/or particularly dusty and dirty environmental conditions, however, may eventu-
ally cause unsatisfactory operation due to slow-moving parts or sticking cylinders. In this case, it may be necessary to clean
and
re-lubricate the lockset to maintain optimum performance. To clean the lockset mechanism, use a penetrating or solvent type
lubricant to loosen sticking components, then lubricate with lithium grease. To free sticking or jammed cylinders, lubricate with
graphite or a non-oily lubricant (such as Lock-EZE). Do not use petroleum-based lubricants in the cylinder keyway.