Xantech DCCBB Door User Manual


 
08905108C - 3 -
PROGRAMMING
A. Adjusting Speaker Volume
The speaker volume pot can be adjusted to i
or decrease the speaker volume to the level desi
ncrease
red.
. Adjusting the Microphone Volume
ffic,
ay
ay
rd
e volume is set too high or
. Call Length Time Out
mum length of time that calls can be connected to 5 minutes.
. Silence Time Out
length of time that calls will remain connected without voice activity to 40
PERATIONS
button is pressed, the DCSS/DCCBB phone goes off-hook, much like a standard
BB
DCSS/DCCBB will also answer any incoming call.
B
In certain noisy locations (background tra
machinery or wind), the microphone volume m
need to be decreased. A symptom of this is one-w
talk path, in which the distant party cannot be hea
over the speaker. A microphone volume pot is
provided for increasing or decreasing the
microphone volume.
Note: If the microphon
too low, one-way talk path may occur.
C
This feature limits the maxi
D
This feature limits the
seconds.
O
hen the push W
speaker phone. In the event that the line is busy, the DCSS/DCCBB will hang-up. The DCSS/DCC
will also automatically hang up on CPC, silence, busy signal, return to dial tone or time out. The