Filter
Top Products
12 13
SECURE VIDEO CONNECTION SETUP
If you prefer a secure video connection, you can use a video cable to
connect the camera directly to your TV. This setup does not use the wireless
video receiver.
1. Turn off the camera’s wireless transmitter: Locate the transmission
switch on the bottom of the camera (see picture below). Select Transmit
Disable. This turns off the wireless transmission of the video signal from
the camera.
2. Connect the camera to power: Plug the camera’s power supply into a
standard wall outlet. Plug the other end into the camera. Remove the
protective cover from the camera’s lens.
Select
Transmit
Disable.
BASIC CAMERA OPERATION
Once you have the camera set up, you’re ready to start using it. It’s
easy to get started. Here’s how you use the remote to control the
camera:
Move the camera
Use the arrow buttons
to turn the camera
left or right (called
panning) and up or
down (called tilting).
Zoom
Press Zoom In to zoom
closer to your subject
and see more detail.
Press Zoom Out to see
a bigger area.
Focus
When you move
the camera, you
may need to press
Autofocus to
bring your subject
into focus.
Center
Press Center, to
move the camera
back to its starting
position
Select the camera
Press C1 to select
the camera.