Windsor SG36 Vacuum Cleaner User Manual


 
MAINTENANCE
86037580 GLIDE 01/03/07
4-17
SERVICE SCHEDULE
MAINTENANCE BEFORE EACH
WORK PERIOD
AFTER EACH
WORK PERIOD
50
HRS
100
HRS
200
HRS
Check water level of batteries after charging;
add distilled water if necessary
*
Check that recovery tank cover seals tightly
*
Visually check for damaged or worn tires
*
Check brushes or pads for proper installation
*
Check vacuum hose connections
*
Check that squeegee is securely attached
and properly adjusted
*
Check that side squeegees are properly
adjusted
*
Check for securely attached drain hose, plug
and caps
*
Check brakes and steering for proper
operation
*
Inspect vacuum filter for debris
*
Clean out solution tank and filter, check flow
*
Run vacuum motors to dry
*
Clean brushes or pads and check wear
*
Clean main and side squeegee blades and
check wear
*
Clean out recovery tank and vacuum filter
*
Clean and inspect float shutoff
*
Clean outside of tanks, check for damage
*
Store with covers off tanks
*
Charge batteries
*
Check side squeegee for wear
*
Clean off top of batteries
*
Check battery cells with hydrometer
*
Inspect scrub deck skirts
*
Clean solution strainers
*
Check battery connections are tight
*
Clean battery cases and battery
compartment
*
Check parking brake adjustment
*
Check brakes discs and calipers for damage
or wear
*
Clean pivot points on squeegee and scrub
deck
*
Check all motors for carbon brush wear
*
Check motor commutators
*
Check steering chain tensioner
*
NOTE: Traction drive, wheels and batteries should be serviced based on traction drive hour meter. The
scrub brush hour meter should be used for all other service schedule items.