Filter
Top Products
English 11
Error Remedy
Appliance cannot
be started
Check if the mains plug is connected.
Insufficient water
quantity
Check clean water level, refill tank if necessary.
Clean the water distributor (see chapter "Cleaning the water
distributor").
Pull off the valve on thesolution tank (Fig. 4, see inside front
cover) and rinse in lukewarm water.
Fresh water reser-
voir drips when re-
filled
Pull off the valve on the solution tank (Fig. 4, see inside front
cover) and rinse in lukewarm water.
Insufficient vacu-
um performance
Empty the solution tank.
Lock the recovery tank in place on the appliance.
Clean the seals between recovery tank and cover and
check for tightness, replace if required.
Check that all squeegee are locked into place in the clean-
ing head.
Squeegee worn, replace if required.
Check that both suction tube parts are correctly attached to
the suction tube connection.
Check the suction tube and the suction channel in the
cleaning head for obstruction and remove if necessary (see
"Cleaning suction tube").
Insufficient clean-
ing result
Check the brush for wear, replace if required.
Brush does not
turn
Check if foreign matters are blocking the brush; remove for-
eign matter if required.