Filter
Top Products
16 English
Î Let off water by opening the dosage de-
vice at the discharge hose.
Î The rinse the dirty water reservoir with
clear water.
Î Release the coupling at the upper end of
the fill level display.
Î Lower the hose for the fill level display
into a suitable collector and drain off li-
quid.
Î Engage the coupling on the appliance
again.
Î If you want to transport the appliance on
a vehicle secure it from slipping.
To reduce the required space the push
handle can be turned to the front:
Î Release the star grips of the push handle
fastening.
Î Turn the push handle to the front.
ƽ Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the plug be-
fore performing any works on the appliance.
For BR...W Bp also turn the key switch to "0"
and press the emergency stop switch.
ṇ Warning
Risk of damage to the appliance on account
of water leakage. Drain out dirty water and
the remaining free water before wokring at
the machine.
ṇ Warning
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggressi-
ve detergents.
Î Drain off dirty water.
Î Check the lint filter, clean if required
Î Clean the outside of the appliance with a
damp cloth which has been soaked in
mild detergent.
Î Clean the squeegee blades and the
wiping lips, check for wear and replace if
required.
Î Check the brushes for wear, replace if
required.
Î Charge battery if required.
Î During long operating pauses: Carry out
refill charging for the battery.
Î Check battery pole for oxidation; brush it
if required and lubricate it using pole
grease. Ensure that the connection ca-
ble sits firmly.
Î Check the acid density of the cells if the
batteries are not maintenance-free bat-
teries.
Î Check the condition of the seals between
dirty water reservoir and cover, replace if
required.
Î Clean the brush tunnel (only Saber Com-
pact 22 SP).
Î Remove the cover for water supply at the
cleaning head and clean the canal. (only
Saber Compact 22 SP)
Î Clean the connection to the detergent
bottle with a wet piece of cloth.
Î Replace pump hose of the metering
pump.
Î Have the prescribed inspection carried
out by the customer service.
Emptying the fresh water tank
Transport
Maintenance and care
Maintenance schedule
After the work
Monthly
After 400 operating hours or once a
year
Yearly