MACHINE OPERATION
86317500 CHARIOT SCRUBBER 11/15/08
3-17
TANK DOME
RECOVERY
DRAIN HOSE
SOLUTION
DRAIN HOSE
RECOVERY
EMPTYING AND CLEANING TANKS
1. Park the machine next to a floor drain. Drain
hoses are at the front of the machine.
2. Turn the machine power off.
RECOVERY TANK
1. Remove the recovery tank dome. Pull the large
drain hose from the mounting pocket. Unscrew
cap, then lower hose in direction of the drain. Do
not stand in front of end of hose. Recovered
solution will come out with force.
2. Flush the recovery bag out with clean water. Do
not use water hotter than 140°F (60°C) to clean
tank. Damage may occur.
3. Clean debris from dome basket.
4. Clean off the float shut-off system and inspect
for free movement of float. The float shut-off
system is located in the rear of the recovery
tank.
5. Replace the drain cap and secure drain hose
under tank.
6. If machine is to be stored, leave the recovery
tank dome off, or propped open.
SOLUTION TANK
1. Remove the recovery tank dome.
2. Pull the solution drain hose from its mounting
pocket. Unscrew the cap, then lower hose in
direction of drain.
3. Remove the solution tank lid.
4. Flush the solution tank out with clean water and
run several gallons of clean water through
systems. Do not use water hotter than 140°F
(60°C) to clean tank. Damage may occur.
NOTE: Never allow solution to remain in tank.
Damage to tank, seals and valves could occur.