Filter
Top Products
10
OPERATIONS
SWITCHING ON THE AIR CONDITIONER
The portable air conditioner can be switched on by the remote control or by pressing the Power button on the control panel. To transmit signals from
the remote control to the air conditioner, point the front part of the remote handset towards the control panel on the air conditioner. Reception of the
signal is confirmed by a beep. The maximum signal transmission distance is approximately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause interferences.
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control and the air conditioner.
Remove the batteries if the remote control is not used for long periods.
INSTALLING BATTERIES
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control.
Always change both batteries at the same time.
To insert the batteries, open the flap on the back of the remote control. Strictly adhere to the polarity signs on the bottom of the
battery housing, close the flap once the batteries have been inserted.