Filter
Top Products
4
The configuration menus allow you to
set certain thermostat operating
characteristics to your system or
personal requirements.
To enter the User Configuration menu,
press PROGRAM
RUN
to make sure
the thermostat is in the run program
mode, then press TIME
FWD
and
TIME
BACK
at the same time. The
display will show the first item in the
configuration menu.
The following charts (pages 5 & 6)
describe each item on the menus. Press
TIME
FWD
to move forward to the
next item in the menu or TIME
BACK
to move backward to the previous
item. Set these according to your
personal preference using
or
. To enter the Keypad Lock
menu, while in the User Menu, press
and hold TIME
FWD
and TIME
BACK
for at least two seconds.
To exit either menu and return to
normal operation, press PROGRAM
RUN
. To re-enter to the User menu at
any time press PROGRAM
RUN
,
then press TIME
FWD
and TIME
BACK
at the same time. While in the
menus, if you do not press any buttons
for two minutes, the thermostat will
revert to normal operation.
CONFIGURATION