Filter
Top Products
QUICK START
6
The thermostat will automatically
assign the correct day of the week
after the date is set.
Press the Enter button when
fi nished.
ChoosetheSystemSetting
From the Home screen, press the
button as shown to choose the
system setting.
If you want to change the heating and/or cooling programs in your thermostat,
see the “ProgrammingYourThermostat” section.
FactoryPre-ProgrammedHeatingandCoolingSchedule
Wake Up
(Morning)
Leave for Work
(Day)
Return Home
(Evening)
Go to Bed
(Night)
Heating Program 6:00 AM 70
o
F 8:00 AM 62
o
F 5:00 PM 70
o
F 10:00 PM 62
o
F
Cooling Program 6:00 AM 75
o
F 8:00 AM 83
o
F 5:00 PM 75
o
F 10:00 PM 78
o
F
EnergySavingFactoryPre-Program
Your thermostat is programmed from the factory with the energy saving settings
shown below for every day of the week. If this program meets your needs, simply
select either Cool, Heat or Auto using the System button and press
to begin
program operation.
NOTE: If system power is lost for more than eight hours, the clock will have to be
reset. Programming and confi guration settings will be saved.