Filter
Top Products
3
THERMOSTAT QUICK REFERENCE
Figure 3 – Home Screen Display
Home Screen Description
Programming and Confi guration Items
1
“Sistema On” indicates when heating or cooling stage
is energized. “Sistema On +2” indicates when a second
stage is energized.
2
The word Retener (Hold) is displayed when the
thermostat is in the Retener (Hold) mode. Temporal
Retener (Temp Hold) is displayed when the thermostat
is in a Retener Temporal (Temp Hold) mode.
3
Displays Cambiar Filtro (Change Filter) when the
system has run for the programmed fi lter time period as
a reminder to change or clean your fi lter.
4
Displays “Adjuste” (Set) for setpoint when in Run
Program mode.
5
Displays System Mode Calor (Heat), Aux (Emer),
Auto, Frio (Cool), Off or Time in menu mode.
6
Displays Fan Mode (On, Auto) or “Arrancar” in Menu
mode.
7
Displays “Arrancar Programa” (Run Schedule),
“Programa” (Schedule), or “Menu”.
8
Displays “Guardar” (Save) when Cool Savings
TM
is
working.
9
Displays “Bomba de Calor” (Heat Pump) when system
is confi gured as Heat Pump thermostat.
10
Displays “Retener” (Hold) in programmable mode when
not in “Retener” (Hold) mode. Displays Light Bulb in
non-programmable mode.
11
Initially displays “Auto Prog”. If Auto Schedule had
been used or disabled, then it displays “Cool Savings”
when in the Frio (Cool) Mode if Cool Savings has been
enabled in the menu.
12
“Llamar Servicio” (Call For Service) indicates a fault in
the heating/cooling system, it does not indicate a fault in
the thermostat.
Figure 4 – Programming & Confi guration Items
7
6
5
11
10
8
4
2
12
3
1
9
SISTEMA
Button
VENT
Indicator
Setting
Temperature
Room
Temperature
Displays the power level of
the 2 “AA” batteries:
indicates good power level
indicates batteries at about
half power. “Cambiar ”
(Change ) indicates batteries
are low and should be replaced with
2 new premium brand “AA” Alkaline
batteries. (See page 2 for more details)