Filter
Top Products
Operating Instructions
Starting your air conditioner
Ak
conw
system
contml
Ttlernloslat
colltrol
Electkal Shock Hazard
l Plug unlt only Into groundad alectrkal
outlet
l Do not use an axtanalon cord.
l Do not operate unlt wlth front removed.
Failure to follow the above precautions
could result In elwtrkal shock or personal
Injury.
1. Set Alr Control
to OFF for maximum cooling.
2. Set System Control
to the desired setting.
LO COOL ...............................
for sleeping comfort
MED COOL .............................
for normal cooling
HI
COOL ...............................
for maximum cooling
FAN ONLY .........................
for
circulating room
air
when no cooling is desired
3. Turn the thermostat control
to number 6 (mid-
setting). You can adjust the air conditioner’s
cooling performance by resetting the thermostat
control to a higher number for maximum
cooling. Lower the number setting for less
cooling. You will need to experiment to find the
setting which suits you best.
NOTE: lf you turn your air conditioner off, or if the
compressor turns off when bwering the thermostat
control, wait at least three minutes before turning it
bade on or you may blow a fuse or trip a circuit
breaker.
Changing air direction
The louvers, in the grille area at the top of the air
conditioner, control the direction of the condi-
tioned air.
l Move tabs at bottom of the grille in the direction
you want the air to go (right, left or straight
ahead).
l Move tab in center louver to direct air up or
down.
3