Filter
Top Products
10
Operating Instructions
BA
Fan
control
Thermostat
control
Thermostat
control
B
Starting your air conditioner
1. Push VENT control closed.
2. Set fan control to desired setting.
If your air conditioner look like control panel A.
LOW COOL ..........................for sleeping comfort
TURBO COOL .................... for maximum cooling
LOW FAN ............. for circulating air at low speed
when no cooling is desired
HIGH FAN........... for circulating air at high speed
when no cooling is desired
If your air conditioner looks like control panel B.
LOW COOL ..........................for sleeping comfort
TURBO COOL .................... for maximum cooling
FAN.......................for circulating air at low speed
when no cooling is desired
3. Turn the thermostat control to the desired
setting. You can adjust the air conditioner’s
cooling performance by turning the
thermostat control clockwise for more cooling
or counterclockwise for less cooling. You will
need to experiment to find the setting which
suits you best.
NOTE: If you turn your air conditioner off or if
the compressor turns off when lowering the
thermostat control, wait at least 3 minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.
Heat/Cool air conditioner heat
settings (air conditioners with
control panel B only)
1. Set fan control to a heat setting.
LOW HEAT ........................... for reduced heating
HIGH HEAT ........................for maximum heating
2. The electric strip heater is activated when the
fan control is set to a heat setting.
3. For heating, turn the thermostat control
counterclockwise.
NOTE: Your air conditioner is not designed to be
used as a primary heat source. It is intended for
supplemental heating only.