Filter
Top Products
7
Starting your air conditioner - Style 2
1. Set the VENT Control (some models) to CLOSED
for maximum continuous cooling. The VENT Control
allows you to draw stale or smoky air from the
room.
OPEN - to vent room air to the outside.
CLOSED - to circulate room air.
The VENT Control will function only when FAN
CONTROL is operating.
2. Set the FAN CONTROL to the desired setting.
When the air conditioner is operating at LOW
COOL, HIGH COOL (some models), or TURBO
COOL, the fan circulates air continuously.
TURBO COOL - for maximum cooling
HIGH COOL (some models) - for normal
cooling
LOW COOL - for sleeping comfort
FAN ONLY
When the FAN ONLY setting is selected, the fan will
run continuously to move air, but the air will not be
cooled.
POWER SAVER (some models)
When the air conditioner is operating on POWER
SAVER, the fan runs only when cooling is needed.
The fan stops circulating air when the room
temperature matches the THERMOSTAT Control
setting.
Since the fan does not circulate the room air
continuously, less energy is used but the room air is
not circulated as often. Use POWER SAVER when
you are away from home or asleep.
If air conditioner has one of these controls:
TURBO
TURBO
TURBO
Pull to open.
Push to close.