Filter
Top Products
6
To operate air conditioner with remote control
NOTE: Two AA batteries (not
included) power the remote
control. Replace batteries after
six months of use, or when the
remote control starts to lose
power. Be sure to install
batteries with correct polarity.
Cool
AutoCool
Fan Only
Power Saver
Turbo
High
Low
FAN
SPEED
ON/OFF
POWER
Temp / Time
Timer
To turn the air conditioner on or off:
Press the POWER ON/OFF button.
To raise the temperature: Press
the
▲
button. Each time you press or hold
the
▲
button, the temperature will go up
1° until it reaches 86°F (30°C).
To lower the temperature: Press
the
▼
button. Each time you press or hold
the
▼
button, the temperature will drop 1° until it
reaches 64°F (18°C).
ON/OFF
POWER
Temp / Time
To select the mode: Press the AutoCool,
Cool, Fan Only, or Power Saver button.
When air conditioner is operating in
AutoCool mode, fan speed is adjusted
automatically. When air conditioner is
operating in Fan Only mode, fan speed is
automatically set at Turbo. When air
conditioner is operating in Cool or Power
Saver mode, you can adjust the fan speed.
To select the fan speed (in Cool or
Power Saver mode only): Press the
Turbo, High or Low button.
To set Timer for a 1 to 24 hour delay
until air conditioner turns on (air
conditioner must be in OFF mode):
1. Press the Timer button.
2. Press the
▲
button to change delay time
(1 to 24 hours).
3. Press the Timer button again or wait 10 seconds.
To set Timer for a 1 to 24 hour delay until air
conditioner turns off (air conditioner must be
in ON mode):
1. Press the Timer button.
2. Press the
▲
button to change delay time
(1 to 24 hours).
3. Press the Timer button again or wait 10 seconds.
Cool
AutoCool
Fan Only
Power Saver
Turbo
High
Low
FAN
SPEED
Timer
NOTE: In the event of a power failure, your air
conditioner will operate at the previous settings when
the power is restored.