Filter
Top Products
5
FAN SPEED SELECTION
Press FAN SPEED until you see the display
indicator light for the setting you want. Choose
F1, F2, or F3.
F1 — for low fan speed
F2 — for medium fan speed
F3 — for high fan speed
Using your remote control
Press Power ON/OFF to turn on air
conditioner. When air conditioner is turned on
for the first time after it is plugged in, it will
display the default settings: COOL mode, FI fan speed,
72°. When it is turned on all other times, it will display
the previous settings.
TEMPERATURE SELECTION
Press
to raise the temperature.
Each time you press
, the
temperature will go up 1° until it reaches 86°F.
Press
to lower the temperature. Each time you press
, the temperature will go down 1° until it reaches
60°F.
FAN SPEED SELECTION
Press FAN SPEED until you see the display indicator
light for the setting you want. Choose F!, F2, or F3.
F1 — for low fan speed
F2 — for medium fan speed
F3 — for high fan speed
TIMER
The TIMER can be set for a delay from
1 to 12 hours until the air conditioner
turns on or off.
To set the delay TIMER to turn the air
conditioner off, air conditioner must be in the ON mode.
To set the TIMER:
Press TIMER.
Press TIMER to change delay time (from 1 to 12 hours).
Press TIMER, or wait 10 seconds. (Light will remain on.)
Timer Mode
Power
Saver
Fan Speed
Temp
+–
Power
ON/OFF
Power
ON/OFF
Temp
+–
Temp
+–
Fan Speed
Timer
To set the delay TIMER to turn the air conditioner on,
air conditioner must be in the OFF mode. To set the
TIMER:
Press TIMER.
Press TIMER to change delay time (from 1 to 12 hours).
Press TIMER, or wait 10 seconds. (Light will remain on.)
If you want to change the previous settings:
Turn air conditioner on.
Adjust MODE to FAN or COOL.
Adjust FAN SPEED to F1, F2 or F3.
Adjust TEMPERATURE between 60°F and 86°F.
Turn air conditioner off.
Press TIMER.
Press TIMER to change delay time (from 1 to 12 hours).
Press TIMER or wait 3 seconds.
If you want to keep the previous settings:
Turn air conditioner off.
Press TIMER.
Press TIMER to change delay time (from 1 to 12 hours).
Press TIMER or wait 10 seconds.
To clear TIMER program, press and hold TIMER for 3
seconds. Indicator light will shut off. Air conditioner can
be either on or off.
To see the remaining time (in hours), press TIMER
once after it has been programmed. While the display
is showing the remaining time, you can press TIMER to
increase or decrease the time.
MODE SELECTION
Press MODE until you see the indicator light
come on for the setting you want. Choose FAN or
COOL.
COOL – Cools room. You can then adjust temperature
by pressing
or
. You can select fan speed by
pressing Fan Speed
FAN – Only the fan runs. Display shows “F1, F2 or F3”
(fan only).
POWER SAVER
Press POWER SAVER. Fan runs only when
cooling is needed. Fan stops running when the room
temperature matches the set temperature.
Mode
Power
Saver