Whirlpool ACQ052PK0 Air Conditioner User Manual


 
14
6. Carefully lift air conditioner and slide it into open
window. Make sure bottom guide of air conditioner
drops into L bracket. Be sure that air conditioner is
centered in window from right to left.
1. Turn air conditioner off and disconnect power cord.
2. Remove L brackets and screws installed through top
and bottom of guide panels. Save for reinstallation.
3. Close guide panels.
4. Raise window sash and carefully tilt air conditioner
backward to drain any condensate water in base.
5. Lift air conditioner from window and remove sash
seal from between windows.
7. Lower window sash down behind upper guide of air
conditioner. Make sure the air conditioner tilts to the
back as shown.
WARNING
!
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
WARNING
!
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
window frame
seal
about
1/4"
(6.3 mm)
upper guide
bottom guide
L bracket
L bracket
short
screw
sash seal
wood
screw
8. Extend guide panels to fill window opening. Use 4
wood screws.
9. Insert sash seal behind top of lower window sash
and against glass of upper window.
Removing air conditioner
from window
10.
Fasten L bracket using a short screw.