Filter
Top Products
Operating Instructions
Starting your air conditioner
Air
cmml
Electrlcal Shock Hazard
l Plug unit only Into grounded eiectrkal
outlet.
l Do not use an extenslon cord.
l Do not operate unlt with front removed.
Failure to follow the above precautions
could resutt In electrical shock or personal
injury.
1. Sat Alr Control
to OFF for maximum cooling.
2. Set System Control
to the desired setting.
LO COOL
. . . . . . . . . . . . . . . . . . . . . . . . . for
sleeping comfort
MED COOL
.._...................... for normal cooling
HI COOL
. . . . . . . . . . . . . . . . . .._..__. for
maximum
cooling
FAN ONLY
. . . . . . . . . . . . . . . . . . . for
circulating
rwm air
when no cooling is desired
3. Turn the Thermostat Control
to number 6
(mid-setting). You can adjust the air
conditioner’s cooling performance by resetting
the Thermostat Control to a higher number for
maximum cooling. Lower the number setting
for less cooling. You will need to experiment to
find the setting which suits you best.
NOTE:
if you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least three (3) minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.
Changing air direction
The
louvers in the grille area at the top of the air
conditioner control the directions of the condi-
tioned air.
l
Move tabs at bottom of the grille in the direction
YOU
want the air to go (right, iett or straight
ahead).
l
Move tab in the center louver to direct air up or
down.
3