Filter
Top Products
Carlng For Your Alr Condltloner
Contlnued
Oiling the fan motor
Elect&al Shock Hazard
Unplug power cord from receptacle before
oiling fan motor. Fallure to do 80 could
result ln electrlcal shock.
1. Unplug power cord.
2. Remove unit from cabinet. (See steps l-7 in
“Annual maintenance” on page 7.)
3. Oil the fan motor according to instructions on
the motor. To add oil, remove the oil hole plug
at each end of the motor. An easy-to-use
capsule of especially recommended oil (Part
No. 10943) is available through your nearest
authorized Whirlpool service company, or use
SAE #20 nondetergent oil.
4. Replace the plugs to keep dirt from motor
bearings.
5. Replace unit in cabinet.
6. Plug in power cord.
Energy saving tips
l
Improve home insulation. Seal doors and
windows. Close fireplace flue.
l
Close blinds or drapes on sunny side of house.
Add window awnings.
l
Keep air filter clean.
l
Do not block air flow with drapes or furniture.
l
Ventilate attic. High temperatures in the attic
add to the cooling bad.
l
Try not to use heat-producing appliances during
the hottest part of the day.
l
Turn lights and appliances off when not
needed.
l
Keep heat registers and cool-air returns closed.
l
Use exhaust venting fans while cooking, doing
laundry and bathing.