Filter
Top Products
Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set
Exhaust Vent Control to OPEN.
2. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN). If
no coding is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
To circulate room air:
1.
Set Exhaust Vent Control to CLOSED.
2. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN). If
no coding is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room air
circulation is desired.
Using the energy saver settings
Use the ENERGY SAVER settings when
you do not want the fan to run continuously.
Using these settings causes the fan to stop
when the compressor stops and saves
energy.
Set the Fan Control
to the desired setting.
LOW-for
sleeping comfort
MED -for normal cooling
QUICK COMFORT
-for fastest cooling
Changing air direction
The air direction cartridges on both sides of
the unit control the direction of the cooled
air. The air direction cartridge rotates to
direct the air straight ahead or to the sides of
the unit. The buyers in each air direction
cartridge are operated by a tab. Use the tab
to direct the air up, down, or straight ahead.
6