Whirlpool ACM122XR0 Air Conditioner User Manual


 
6
Position the Air Conditioner
Handle air conditioner gently.
Be sure your air conditioner does not fall out of the opening
during installation or removal.
The place where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded
3prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of the air conditioner.
1. Center air conditioner in window. Check that lower rail of air
conditioner is behind and against back side of windowsill.
Lower window sash to hold air conditioner in place.
2. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
3. Pull left-hand curtain out until it fits into the window channel.
Repeat with right-hand curtain.
Front View
4. Insert one of the #8 x ³⁄₄" round-head screws through left-
hand curtain and into the window channel or through
alternate hole at the top of the curtain and into the window
sash to fasten the curtain to the window.
Top View
5. Repeat for right-hand curtain.
Complete Installation
1. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
2. Place window-lock bracket on top of lower window and
against upper window sash.
3. Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the
bracket into the window sash.
A.Window sash
A.Left curtain
B.Window channel
A
A
B
A.Left curtain
B.Window channel
C.#8 x
³⁄₄
" round-head screw
A.Alternate hole
B.Left curtain
A.Lower window sash
B.Foam seal
C
A
B
A
B
A
B