Whirlpool AD35DSS Dehumidifier User Manual


 
2-5
Dryness Control
The Dryness Control regulates the amount of
moisture in the room. Turn the control knob
clockwise for more drying. Turn the control
knob counterclockwise for less drying. Turn
the control knob to “Dry” to maintain average
humidity conditions.
NOTE: For the first few days of use, turn the
DRYNESS CONTROL clockwise to CONTINU
-
OUS RUN to remove extra moisture from the
furnishings as well as the room air.
SETTING THE CONTROLS
(CONTROL TYPE 3 ONLY)
Starting/Stopping the Dehumidifier
NOTES:
Before turning on the dehumidifier, be sure
that the bucket is empty and fits all the way
into the dehumidifier.
Each time you unplug the dehumidifier or
power is interrupted, the control will return
to your previous settings when power is
restored.
Control Type 3
NOTE: Minimum operating temperature is
38°F (3°C).
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
A.Light glows, indicating the bucket is full or is not in correct position.
B.Adjusts amount of moisture removed from room.
C.Selects fan speed.
A
B
C
1. Plug into a grounded 3 prong outlet.
2. Press POWER to turn on dehumidifier.
IMPORTANT: If the Empty/Adjust Bucket
light comes on, the dehumidifier will not
operate. Empty or adjust bucket.
3. Press POWER to turn off dehumidifier.
NOTE: The dehumidifier will retain your last
settings.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running.
This light indicates that you need to check:
If the bucket is full, empty and reinstall
bucket.
If the bucket is not in position, remove the
bucket and reinstall. Make sure the bucket
fits all the way into the dehumidifier and the
light is off, or dehumidifier will not run.
Fan Speed (Control Type 3 Models Only)
1. Press FAN to select fan speed.
2. Choose Low, High or Auto.
Low—Will reach the desired humidity
setting slower with lower sound level.
High—Will reach the desired humidity
setting faster.