Whirlpool AD35DSS Dehumidifier User Manual


 
2-4
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
DEHUMIDIFIER USE
SETTING THE CONTROLS
(CONTROL TYPES 1 & 2 ONLY)
Starting/Stopping the Dehumidifier
NOTE: Before turning on the dehumidifier, be
sure that the bucket is empty and fits all the
way into the dehumidifier.
Control Type 1
NOTE: Minimum operating temperature is
65ºF (18ºC).
Control Type 2
NOTE: Minimum operating temperature is
55ºF (13ºC).
A.Light glows, indicating the bucket is full or is not in correct position.
B.Adjusts amount of moisture removed from room
.
A
B
A.Light glows, indicating the bucket is full or is not in correct position.
B.Adjusts amount of moisture removed from room.
C.Selects fan speed.
A
C
B
1. Plug into a grounded 3 prong outlet.
2. To turn on dehumidifier, turn DRYNESS
CONTROL clockwise.
IMPORTANT: If the Empty/Adjust Bucket
light comes on, the dehumidifier will not
operate. Empty or adjust bucket.
3. To turn off dehumidifier, turn DRYNESS
CONTROL counterclockwise to OFF.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running.
This light indicates that you need to check:
If the bucket is full, empty and reinstall
bucket.
If the bucket is not in position, remove the
bucket and reinstall. Make sure the bucket
fits all the way into the dehumidifier and the
light is off, or dehumidifier will not run.
Fan Speed (Control Type 2 Models Only)
The Fan Speed controls fan operation
High—for faster moisture removal
Low—for quieter moisture removal