Filter
Top Products
Cleaning the front panel
I
Screw
S&w
1. Unplug power cord.
2 Remove the front panel from unit for cleaning.
Remove two screws from bottom edge of front
panel.
3. Lift the front panel up and toward you.
4. Remove slide-out fifter and clean separately.
(See “Cleaning the filter” below.)
NOTE: Front does not have to be removed to
clean filter.
5. Clean front panel with warm water and mild
soap or detergent. Use a soft cloth. Rinse and
dry. Replace front panel.
6. Wipe control panel clean with a soft, dry cloth.
7. Plug in power cord.
Cleaning the filter
The filter is cleanable. A clean filter helps remove
dust, lint and other particles from the air. Check
every two weeks to see if filter needs cleaning.
1. Remove fifter by sliding the fifter up and out the
top of front panel.
2. Clean fiffer using a vacuum cleaner.
OR
3. lf very dirty, wash filter with warm water and
mild detergent. Air dry thoroughly before
replacing.
4. Replace filter by sliding if back down into
opening at the fop of front panel.
Caring For Your Air Conditioner
Annual maintenance
Your air conditioner needs annual maintenance to
help ensure steady, fop performance throughout
the year.
Call the service company recommended by your
dealer to:
l
Inspect and clean the coils and condensate
water passages.
l
Check fan and fan motor.
The compressor and fan motor are sealed and
need no oiling. Expense of annual inspection is
customer’s responsibility.
OR
If you are familiar with electrical appliances, you
can do the cleaning and maintenance yourself. If
you choose to do so, follow the steps on page
6.
5