Filter
Top Products
Operating
Your Air Conditioner
Starting your air conditioner
Electrical Shock Hazard
l
Plug unit only into grounded electrical
outlet
l
Do not use an extension cord.
l
Do not operate unit with front removed.
Failure to follow the above precautions
could resutt in electrical shock or personal
injury
1. Set Exhaust Vent Control to CLOSED for
maximum cooling.
2. Set Fan Speed Control to the desired setting.
ENERGY SAVER settings-the fan stops
when the compressor stops. This saves
energy by not continuously running the fan.
There are 3 fan speeds: HI for maximum
cooling, MED for normal cooling and LO for
sleeping comfort.
NORMAL settings-the fan runs continu-
ously. There are 3 fan speeds: HI for maxi-
mum cooling, MED for normal cooling and LO
for sleeping comfort.
FAN ONLY setting4rculates room air when
no cooling is desired.
3. Turn the Thermostat Control to a mid-
setting. You can adjust the air conditioner’s
cooling performance by turning the Thermo-
stat Control clockwise for more cooling. Turn
thermostat control counterclockwise for less
cooling. You will need to experiment to find the
setting which suits you best.
NOTE: If you turn your air conditioner off, wait at
least 3 minutes before turning it back on or you
may blow a fuse or trip a circuit breaker.
3