Whirlpool ACPS82 Air Conditioner User Manual


 
Do not use rubbing alchol or flammable toxic
solvents, such as acetone, gasoline carbon
tetrachloride, etc. These can damage the material.
Do not use a sharp instrument or any harsh or
abrasive cleaners.
Energy Saving Tips
. Improve home insulation (seal doors, wrndows,
and close fireplace flue).
l
Close blinds or drapes on sunny side of house.
Add window awnings.
HOW TO STA
YOUR AIR Cd
NOTE: Be sure air conditioner control is set to
UNIT OFF before plugging in the unit.
EXHAUSTVENT
CONTROL
FAN SPEED
CONTROL
THERMOSTAT
Keep air filter clean. Don’t block air flow with
drapes or furniture.
Ventilate attic (high temperature levels add to
normal cooling load).
Try not to use heat producing appliances during
the hottest part of the day. Turn lights, radios,
televisions, and other appliances off when not
needed.
Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
.RT AND USE
BNDITIONER
To start Your Air Conditioner
1. Set the EXHAUST VENT CONTROL to CLOSED
for best cooling results.
2. Set the FAN SPEED CONTROL to the desired
setting.
QUIET COOL. .for sleeping comfort
MAX COOL .for maximum cooling
FAN ONLY
for air circulation onlv
3. Turn THERMOSTAT CONTROL to the mid
(Number 6) setting. You can adjust the air
conditioner’s cooling performance by resetting the
thermostat control to a higher number for maximum
cooling. Lower the thermostat for less cooling. You
will need to experiment to find the setting which suits
you best.
compressor (motor)
may shut off.
__
When the 1
.
before restarting the air conditioner or turning the
compressor back on.
3