Filter
Top Products
Operating Instructions
Continued
The exhaust vent control
The Exhaust Vent Control setting draws stale or
smoky air from the room.
.l. To exhatist room air.
Set Exhaust Vent Control to OPEN. For cooling,
set Fan Speed Control to one of the COOL
settings. For heating, set Fan Speed Control to
one of the HEAT settings. ff no cooling or heating
is desired, use the FAN ONLY setting.
2. To circulate rcom air:
Set Exhaust Vent Control to CLOSED. For
cooling, set Fan Speed Control to one of the
COOL settings. For heating, set Fan Speed
Control to one of the HEAT settings. lf no cooling
or heating is desired, use the FAN ONLY setting.
NOTE: For maximum performance, the Exhaust
Vent Control must be in the CLOSED position
when cooling, heating or room air circulation is
desired.
Changing air direction
The air direction cartridges on both sides of the
unit control the direction of the cooled or heated
air. The air direction cartridges may be rotated to
direct the air straight ahead or to the side of the
unit.
The louvers in each air direction cartridge are
operated by a tab. The tab may be used to direct
the air up, down or straight ahead.
Cleaning Your Air Conditioner
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your Whirlpool servicing dealer for
an annual checkup.
Electrical Shock and Fire Hazard
l
Unplug power cord from receptacle
before cleaning unit. Failure to do so
could result in electrical shock or per-
sonal injury.
l
Do not use flammable fluids, solvents,
abrasive cleaners, or strong detergents.
Fire or product damage could result.