Whirlpool 4373526 Water Pump User Manual


 
Troubleshooting
If you need
Problem
Water pump cycles
on and off:
Water pump does not
run:
Water pump operates
continuously until
motor timer stops
motor:
Air in system.
Cause
Water leaks at one or more
outlet connectors.
Electrical power not being
supplied.
Water bottle is empty.
Water bottle is empty.
Air leak in water bottle
to pump tubing.
Solution
l Check all fittings and water
pump connections for
leaks.
l Push in connector and
remove tubing. Cut off
1.3cm (l/2”) of tubing and
reinsert into connector.
. Do Not cut water bottle to
pump tubing.
l Check that power supply
cord is plugged into outlet.
l Check if circuit breaker has
tripped or if fuse has blown.
. Check to see if water bottle
is empty. Replace water
bottle according to
instructions.
. Press switch on the water
pump to “0” position.
Then press the switch to
the“l” position to reset
motor timer.
Replace water bottle
according to instructions.
l Check that tubing in water
bottle is touching bottom of
bottle. If tubing is too high, it
will take in air.
. Check that tubing is tightly
pushed in place inside
water pump connector.
Pure
Deliver-v Water Puma Warrantv
Length of Warranty
Whirlpool Will Pay For:
ONE YEAR FULL
WARRANTY
From date of purchase.
Replacement parts and repair labor to correct defects in
materials or workmanship. Service must be provided by an
authorized Whirlpool International distributor or their
appointed dealer or service company.
I
Whirlpool Will Not Pay For:
A, Service calls to:
1. Correct the installation of the pump,
2. Instruct you how to use the pump.
3. Replace house fuses, circuit breakers or correct house wiring.
B. Repairs when pump is used in other than normal use.
C. Damage resulting from accident, alteration, misuse, abuse, improper installation or
installation not in accordance with local electrical codes,
semice...
Call your authorized Whirlpool
International Distributor or their
appointed dealer or service company.
When you call, you will need the pump
model number which is located on the
serial/rating plate on the base of
the pump.
Whirlpool does not assume any responsibility for incidental or consequential damages
Panel C