Filter
Top Products
HearthStone Quality Home Heating Products Inc ® Model 8220
12
DOUBLE WALL CONNECTORSINGLE WALL CONNECTOR
CLEARANCE TO COMBUSTIBLES
CHIMNEY CONNECTOR
VENTING COMPONENTS AND
CONFIGURATION
C
OMPONENTS OF A VENTING SYSTEM
DO NOT CONNECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE
The complete venting system consists of several
components: chimney connector, wall thimble,
wall pass-through, chimney, and liner. It is
absolutely necessary that if you install all of
these components, they must remain within the
clearances to combustibles discussed earlier to
install your stove safely. To protect against the
possibility of a house fire, you must properly
install and constantly maintain the venting
system. Upon inspection, immediately replace
rusted, cracked, or broken components.
• The chimney connector is the stovepipe from
the woodstove to the chimney. The chimney
connector stove pipe must be 6" (152 mm)
diameter, 24 MSG or 25 MSG blued steel
connector pipe. Do not use aluminum or
galvanized steel pipe - they cannot withstand
the extreme temperatures of a wood fire.