Filter
Top Products
14
PROBLEM CHECK CURE
Side Burner does not light.
Is gas supply off? Turn supply on.
Flame is low in HIGH position.
Is the fuel hose bent or kinked? Straighten hose.
Is LP fuel low or empty? Refi ll LP cylinder.
The excess fl ow safety device, which
is part of the barbecue to cylinder
connection, may have activated.
To reset the excess fl ow safety device turn all burner control
knobs and the cylinder valve OFF. Disconnect the regulator
from the cylinder. Turn burner control knobs to HIGH. Wait at
least 1 minute. Turn burner control knobs OFF. Reconnect the
regulator to the cylinder. Turn cylinder valve on slowly. Refer to
“Lighting Instructions”.
Push button ignition does not work.
Does burner light with a match? If match lights burner, check igniter (see below).
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your region using the contact
information sheet provided with your manual.
SIDE BURNER MAINTENANCE
ƽWARNING: All gas controls and supply valves should be
in the OFF position.
Make sure wire is connected between the igniter and electrode. Spark should
be a white/blue color, not yellow.
1) Igniter Wire
2) Burner
(3)
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter
SIDE BURNER TROUBLESHOOTING