Water Boss 550 Water System User Manual


 
Use this diagram as a location and installation guide for your
Model 550
,
Model 700
,
and
Model 900
,
water conditioners. This diagram applies to all types of installations
(i.e. basement, slab, crawl space, outside).
Bypass Valves. To simplify installation and servicing, a one-piece or a three way bypass
valve appliance is recommended when installing your appliance. A bypass appliance also pro-
vides access to untreated water when required (i.e. for lawn and gardening purposes.)
Also, see figures 4 through 6.
Caution: If less than 10 feet of pipe connect the water treatment appliance(s), to the water heater,
then a Check Valve must be installed between the water treatment appliance and the water heater.
Install the Check Valve as close to the water heater as possible.
5
Reference Illustrations
Figure 1- Installation Guide
When calling the HelpLine, please have this guide and the serial number
available. From 8 am to 5 pm EST, call 1-800-437-8993.
Your serial number may be found on top of your valve assembly.