Filter
Top Products
AFTER SALES SUPPORT 1 888 367 7373 customer-service@wk-usa.com 03-12-14 / VC9385S
BEFORE FIRST USE
IMPORTANT: Do not use the Carpet Cleaner as a dry vacuum.
Vacuum the carpet thoroughly.
Remove as much furniture from the room as possible. If unable to remove the furniture, place
plastic or foil under and around furniture legs until the carpet has completely dried.
Check for Color Fastness:
Before cleaning carpet, test for color fastness. Dampen a white cloth with carpet solution. Test a
small area in an inconspicuous place. Gently rub over the area. Check each color for color
bleeding. If the cloth remains clean, it should be safe to clean the carpet.
PREPARING THE CARPET CLEANER
Hold the handle of the clean water tank and press
“Clean Water Tank Release”. Tilt clean water tank
away from the Carpet Cleaner and remove.
Unscrew the tank cap from the bottom of the water
tank and fill with 2 teaspoons of cleaning solution.
Fill the remainder of clean water tank with warm tap
water to the MAX line. Replace cap.
Place bottom of clean water tank into the Carpet
Cleaner and push back until it locks into place.
NOTE: Any carpet cleaner solution available at your local retail or hardware store can be used
with this Carpet Cleaner. Please note you may need to modify the amount of cleaning solution
you use.
Plug cord into electrical outlet. Turn on the Carpet Cleaner by using the on/off switch
located on the side of the machine.
IMPORTANT: Never leave unit unattended with power on. Turn off before emptying and filling tanks.
Do not over saturate the carpet. 7
1
Getting Started
7