ADVANCED SAFETY FEATURES
OPERATING TIPS
In smaller areas, you might prefer to set the unit in LOW mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
To use the iControl as a personal fan, set the unit to FAN mode.
The iControl, like any other 1500-watt electric heater, draws up to
12.5 amps of electric current. If using your iControl on HIGH setting
causes your home circuit breaker or fuse to trip, we offer the following
suggestions:
Try turning off other electrical appliances that run on the same circuit
as your heater.
Run your heater in LOW mode.
Have your electrician add an additional circuit to your home’s
electrical system.
When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the iControl.
When the unit is first turned on there is a slight delay before heat will
start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now function normally.
If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT
TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.
GROUNDED HEAVY-DUTY POWER CORD
Adds durability and a more secure wall connection.
1.
2.
3.
4.
5.
6.
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
TIP-OVER SWITCH PROTECTION
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
Español16 17
Español