EN - 6
1
2
3
4 5
6 7
Ø4.5mm~Ø6.5mm
(C)
(D)
(B)
(A)
(E)
M12 Cable Connector
Components of the Waterproof
Connector
M12 Cable Dimension (unit: mm)
Assembling Steps
Clamp Ring (C)
Gasket (D)
Plastic Nut (E)
Seal (B)
Sealing Nut (A)
Prepare an Ethernet cable
and strip part of the sheath.
Insert the seal into the clamp
ring.
Insert the gasket into the clamp
ring.
Insert the stripped Ethernet
cable through the sealing nut
and the clamp ring.
Follow the pin definition in the below table
to solder the stripped Ethernet cable to the
plastic nut.
Secure the sealing nut to the
clamp ring tightly.
Follow the pin definition in the below table
to connect the Ethernet cable to the M12
cable and secure them tightly.
Ethernet Cable /
M12 Cable
Wire Color
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Brown/White
7 Brown
8
Green
Ethernet Cable
M12 Cable