Filter
Top Products
9
Bulb Removal and Replacement — continued
Re-installing Bulb and Plastic Diffuser
1. Insert bulb into lamp by firmly holding bulb base and pushing down until
you hear a “snap” to seat properly.
2. Re-install the bracket using the screws (E) you previously removed.
3. To attach the plastic diffuser to the lamp body,
loosely insert Tab A into Slot A.
4. Insert one diffuser corner at a time.
5. Work one diffuser corner into the side track and
slide gently down into place into bottom track.
6. Snap side tab into place (side slot). Entire side of
lens should be seated into the track.
7. Repeat for other side of diffuser. Note alignment
of diffuser corner into side track.
8. Firmly push diffuser down until Tab A snaps into place.
Align top of diffuser in top track as necessary.
Slot A
Tab A
Side Slot
SideTab
Top Track
Side Track
Bottom
Track
Tab A
Diffuser
Corner
Bottom
Track
Tab A