Verilux VD10 Indoor Furnishings User Manual


 
4
Warnings and Precautions
Please read these instructions before using this lamp.
For indoor use only.
Do not place near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
Do not block any ventilation openings.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where the power cord exits the lamp.
Unplug this lamp during lightning storms or when unused for long periods.
There are no user serviceable parts in this lamp. Do not dismantle. If the lamp
has been damaged in any way, such as power cord or plug is damaged, liquid
has been spilled or objects have fallen onto the lamp, the lamp has been
exposed to rain or moisture, does not operate normally or has been dropped,
it should not be operated.
Lamp to be operated only with 100-240 VAC, 50/60Hz power.
Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation or
are subject to constant vibration.
Not for use with light dimmers, timers, motion detectors, voltage transformers
or extension cords.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY:
Turn off/unplug before cleaning.
Do not look directly at the lighted LED’s without the diffuser being in place.
Do not operate the lamp in close proximity to flammable or combustible
vapors, such as aerosol spray products, or where oxygen is being
administered.
Never cover the lamp when it is in operation.
To prevent risk of shock or personal injury when cleaning lamp, make sure
you have turned off and unplugged the lamp.
SAVE THESE INSTRUCTIONS