8
Bulb Replacement Instructions
Removal
1. Unpluglampfrompowersource.
2.Toaccessthebulb,removeOptix
®
glare control filter by depressing the
thumb tab and lifting it out.
3.Firmlyholdbulbbase(B)andpull
bulb (C) from the socket (A) in an
outwardmotion(Fig.8).
Installation
1.Unpluglampfrompowersource.
2.Firmlyholdbase(B)andpushbulb
(C) into the socket (A).
3. Be sure bulb is firmly seated in the
socket (see below) and snapped into
themetalbulbclip(D)(Fig.9).
4.ReplaceOptixglarecontrollter.
No
gap
Notice
large gap
Correctly seated bulb Incorrectly seated bulb
YES
NO
Fig.8
Fig.9
C
B
A
D
CAUTION:ALWAYSUNPLUGLAMPBEFOREPERFORMINGBULB
REPLACEMENTORINSTALLATION.