Verilux VD03 Indoor Furnishings User Manual


  Open as PDF
of 12
 
6
Assembly Instructions — continued
Vents
4. Attach the ballast to the power
cord.Usecaretoalignthe4-pin
plugproperly.DONOTFORCE.
The 4-pin plug was designed to
fit in only one orientation
(Fig.3).
Attention!
Lift your lamp by the vertical shaft.
Fig.3
5.Plugballastintoastandard120V50/60Hz
outlet.Turnlampon.ThegreenLEDindicator
on center of the ballast should be illuminated
(Fig.4).IftheLEDindicatordoesnotilluminate,
please refer to the troubleshooting section of
this manual (see page 9).
6. If bulb does not illuminate instantly, please refer
to the troubleshooting section of this manual.
7. Adjust lamp brightness to the desired level
(low-medium-high).
WARNING: Do not block vents on ballast. Vents
are necessary for proper function of the ballast;
blocking them may cause overheating of the ballast
and increase risk of fire.
Fig.4
 previous next