Filter
Top Products
6
HEADERSet-up Instructions
To prevent damage during shipping, the Verilux
®
bulb is surrounded
by protective padding. Carefully remove and dispose of the protective
padding. Check to ensure that the bulb is fully seated and has not
come loose from the socket during shipping. There should be no gap
between the bulb and socket.
Attaching the Parabolic Grid Diffuser:
1. Remove grid diffuser from protective plastic bag.
2. Insert plastic pegs at bottom of grid diffuser into openings near the
bulb socket.
3. Snap tab into place.
4. Plug lamp into an outlet and turn it on. If bulb does not illuminate
instantly, please refer to the troubleshooting section of this manual.