Filter
Top Products
STARTING UP
1, 2,/ 3./
Holding the power cord by the plug, pull the
cord out completely. Red tag will indicate the
end of the cord. Plug into the outlet.
BRUSH VACUUMWNG
Tilt the upright vacuum cleaner
beck before you start vacuuming.
At the same time, use your foot
to press the nozzle down onto
the carpet.
x_
For easier handling while
vacuuming, hook the power
cord onto the power cord
hook.
Brush Vacuuming on carpeted floors:
• The brushroll is switched on or off
using the brushroll on/off switch
(Diagram 2). Switch brushroll on for
carpeted floors.
• The rotating brushroll loosens deeply
embedded dirt and brings it to the
surface.
Vacuuming on smooth surfaces:
• Switch brushroll off to obtain the
best results when vacuuming smooth
barefloor surfaces.
Switch the upright vacuum
cleaner on or off by pressing the
on/off switch.
BRUSHROLL RESET
1
RESET BUTTON
If something becomes lodged and
brushroll shuts off, turn cleaner off
and remove obstruction. Once the
problem has been fixed, the vacuum
cleaner can be switched back on
again after approximately 2 minutes
by pressing the reset button.
7