Filter
Top Products
,
Make sure vacuum has been
switched off and unplugged
before changing light bulb.Also,
allow the light bulb to cool.
Remove the two screws and
remove the light cover.
Remove the burned out light
bulb and pull it from the socket.
DEBRIS REMOVAL / TURBO TOOL
1 2.f-
Insert the new bulb.
Remove Turbo Tool from end of
suction hose. Unsnap locking
tabs on both sides of Turbo Tool.
Flip the top cover up and
remove obstruction.
To reassemble, close top cover
of TurboTool and snap both
locking tabs into place.
Attach the light cover using
both screws.